Home  ›  Pixma Mg2520 Power Continue to Blinking

Pixma Mg2520 Power Continue to Blinking

Written By Wednesday, October 26, 2022 Add Comment Edit

When an error occurs you will see flashing lights on your printer panel. Depending on the error, a support code (error number) and a message may also display on your computer screen.

The light(s) on your printer panel may flash as follows:

Table 1: Light flashes repeatedly orange

Number of flashes Support Code Cause Action

2 flashes:

 1000 The printer is out of paper. Reload the paper  in the rear tray and press theBlack orColor button to resume printing.

3 flashes:

 1203
1300		 Thecover is opened while printing is in progress.

Paper jam.

  1. If paper is left inside themachine, remove the paper slowly with both hands and close thecover.

  2. Press themachine's Black  or Color  button to clear the error.

    • Themachine ejects the blank paper and resumes printing from the next paper

    • Themachine won't reprint the page that jammed.You will need to try printing again.
      Caution Keep thecover closed while printing is in progress. Opening it can damage themachine.

Clear the paper jam , then reload the paper  properly. Press theBlack orColor button to print.

4 flashes:

 1687 Is the ink cartridge is installed properly?

  1. Open the cover, push the ink cartridge completely up, then confirm that the cartridge is properly installed .

  2. Close the cover.

If the problem isn't resolved, remove, then reinstall the cartridges.
5 flashes 1401
1403
1485		 The ink cartridge isn't installed.
The ink cartridge isn't installed correctly.
The wrong ink cartridge is installed.		 Make sure the appropriate cartridge is properly installed .

8 flashes:

 1700 The ink absorber is almost full.

Press the machine'sBlack orColor button to continue printing. Service will be required soon.
If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.

Or if you still need help, visit our Canon Community by clicking the button below to get answers:

Link to Canon Community Forum

9 flashes:

 1890 The protective material for the ink cartridge or the tape remains attached.

Check the inside of the machine. If protective material or the tape remains attached, remove it.
If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.

Or if you still need help, visit our Canon Community by clicking the button below to get answers:

Link to Canon Community Forum

13 flashes:

 1686 The ink may have run out.

  • The function for detecting the remaining ink level will be disabled since the ink level can't be detected.

  • To continue printing without this function, press the machine'sStop button for at least 5 seconds.

  • Canon recommends to use new genuine Canon cartridges in order to obtain optimum qualities.

  • Please be advised that Canon shall not be liable for any malfunction or trouble caused by continuation of printing under the ink out condition.

14 flashes:

 1684 The ink cartridge can't be recognized.

  • Printing can't begin because the ink cartridge isn't properly installed or isn't compatible with this printer.

  • Install the appropriate ink cartridge.

  • If you want to cancel printing, press the machine'sStop button.

15 flashes:

 1682 The ink cartridge cannot be recognized.
Replace the ink cartridge

.

If the error isn't resolved, the cartridge may be damaged.

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.

Or if you still need help, visit our Canon Community by clicking the button below to get answers:

Link to Canon Community Forum

16 flashes: 1688 The ink has run out.

Replace the ink cartridge  and close the cover.

  • If printing is in progress and you want to continue printing, press the machine'sStop button for at least 5 seconds with the ink cartridge installed. Printing resumes under the ink out condition.

  • The function for detecting the remaining ink level is disabled.

  • Replace the empty ink cartridge immediately after printing.

Table 2: Light flashes alternately between green and orange

Number of
flashes		 Support
Code		 Cause Action

2 flashes:

 5100 Printer error has occurred.

Cancel printing and turn off the printer.
Clear the paper jam  or protective material blocking the cartridge holder, and turn the printer back ON.

Be careful not to touch the components inside the machine. The machine may not print out properly if you touch it.

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.

Or if you still need help, visit our Canon Community by clicking the button below to get answers:

Link to Canon Community Forum

10 flashes: B200, B201 An error requires that you contact the service center.

You may be able to recover from this error by

replacing the ink cartridges

.

Learn more about troubleshooting these errors .

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.

Or if you still need help, visit our Canon Community by clicking the button below to get answers:

Link to Canon Community Forum

brownweeprome.blogspot.com

Source: https://support.usa.canon.com/kb/index?page=content&id=ART142255

0 Response to "Pixma Mg2520 Power Continue to Blinking"

Post a Comment

Subscribe to: Post Comments (Atom)

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel